京西北地区地应变观测与小震震源机制解一致性研究     

茅远哲  曹筠  高晨  冯向东  王晓山 《中国地震》2019,35(4):709-717

以京西北地区作为研究区域，采用应变参数方法解算定点地应变观测数据，将所得应变参数时间序列作为研究对象，利用该结果与研究区内同期小震震源机制解进行一致性分析，研究得出呈拉张性质的定点观测最大主应变方位与震源机制解最大拉张变形方向（T轴）水平投影具有良好的对应性，整体以NNW—NE向为主，且自西向东排布的测点最大主应变方位与震源机制解最大拉张变形方向均表现为逐渐东向偏移的趋势，与华北平原块体北部发生顺时针旋转活动的特征相吻合，结果进一步检验了地应变观测反映区域应变场信息的能力。  相似文献   

Modelling the time‐dependent behaviour of granular material with hypoplasticity          下载免费PDF全文

Shun Wang  Wei Wu  Zhen‐Yu Yin  Chong Peng  Xuzhen He 《国际地质力学数值与分析法杂志》2018,42(12):1331-1345

This paper presents a constitutive model for time‐dependent behaviour of granular material. The model consists of 2 parts representing the inviscid and viscous behaviour of granular materials. The inviscid part is a rate‐independent hypoplastic constitutive model. The viscous part is represented by a rheological model, which contains a high‐order term denoting the strain acceleration. The proposed model is validated by simulating some element tests on granular soils. Our model is able to model not only the non‐isotach behaviour but also the 3 creep stages, namely, primary, secondary, and tertiary creep, in a unified way.  相似文献   

陕西地区小微震震源机制研究   总被引：4，自引：1，他引：3       下载免费PDF全文

惠少兴  严川  王平  金昭娣 《地震工程学报》2018,40(2):288-293

小微震事件的震源机制是区域应力场及诸多地球动力学研究的基础资料。陕西地区为多个地震带的交汇区,近些年积累了丰富的小微震波形资料。运用新近发展的适用于求解小微震震源机制的广义极性振幅技术(GPAT),结合陕西2015地壳速度模型,求解陕西测震台网2011年4月至2015年12月间记录的121次ML1.5~3.5事件的震源机制。反演结果表明:(1)以上事件的震源机制大部分为走滑及正断类型,其比例占64.5%;逆断型机制占22.3%。(2)反演震源机制得到的震源深度与定位深度具有良好的一致性;矩震级与近震震级间存在差别,且这种差别随事件的变小而增大。(3)对比渭河断陷带相关研究成果,验证了该区域震源机制以正断型为主,具有拉张应力状态。  相似文献   

铁路路基粗粒土填料临界动应力试验研究     

王康宇  庄妍  耿雪玉 《岩土力学》2020,41(6):1865-1873

粗粒土填料被广泛应用于铁路基床填料中，直接承受轨道结构传递的列车动循环荷载的长期作用，研究其在列车动荷载作用下的动力行为特征及塑性变形特性可为路基状态评估、沉降控制提供思路。采用GDS动三轴试验系统对铁路基床表层的粗粒土填料动力响应开展研究，通过引入塑性应变率和安定理论，将不同频率、围压、循环动应力比等条件下路基填料的轴向塑性应变的发展规律划分为塑性安定、塑性蠕变和增量塑性破坏3种类型，并确定了塑性安定和塑性蠕变状态的临界动应力水平。研究表明：粗粒土填料的临界循环应力比随着围压的增大而增大，随着荷载频率的增加而减小。通过对试验结果的拟合分析，提出了以围压为变量的临界动应力经验公式，为合理评估列车荷载作用下路基任意深度的动力稳定提供了理论依据。  相似文献   

PBO钻孔应变同震响应分析     

陈燚飞  吕品姬 《大地测量与地球动力学》2019,39(7):765-770

以2017-09-08墨西哥8.1 级地震为例，分析14个PBO综合钻孔应变仪和地震仪同址记录的地震波信号，结果表明，应变仪记录的地震波符合射线传播规律。对不同震中距的站点进行基于S变换的应变仪与地震仪的同震响应特征分析，二者同震响应一致性较好，应变仪频段主要在0.25 Hz以下。取震后1 h应变数据进行分析发现，同震阶段应变主方向指向震中。  相似文献   

A stochastic method for the prediction of icebreaker bow extreme stresses     

《Applied Ocean Research》2019

It is well established that the ship-ice interaction process is quite complex and associated ice loads on the icebreaker hull is a stochastic process. Obviously, novel accurate statistical methods and models should be developed and applied to estimate extreme bow stresses.This paper studies icebreaker bow stresses based on measured distribution of ice thickness in the Arctic Ocean on the way to and from the North Pole. Since the vessel route was carefully selected searching for easier ice conditions, the Arctic Ocean crossing was not a straight linear but a meandering path. Thus, the specific ship route data was biased with respect to general ice statistics in the region, but true with respect to the route specific ice data encountered by a ship navigating in that region. Therefore the route specific ice thickness data is directly needed for ship design and navigation analysis. It is assumed that captains are competent and knowledgeable, and therefore will select a route that provides the most favourable ice conditions.This paper contributes to study of the newest Chinese self-designed polar icebreaker, serving the purpose of enhancing icebreaker operational reliability. Finite Element Method software package ANSYS/LS-DYNA has been employed to simulate bow stress pattern for a particular icebreaker operating in the Arctic Ocean. Extreme bow stresses were estimated using Naess-Gaidai method. The latter is a first application of Naess-Gaidai method to a distribution with lower bound. Thus this paper aims at introducing an efficient method of estimating route-specific icebreaker extreme bow stresses.  相似文献   

Improved algorithms for generalized finite element simulations of three-dimensional hydraulic fracture propagation     

Nathan Shauer  Carlos Armando Duarte 《国际地质力学数值与分析法杂志》2019,43(18):2707-2742

This paper reports improvements to algorithms for the simulation of 3-D hydraulic fracturing with the Generalized Finite Element Method (GFEM). Three optimizations are presented and analyzed. First, an improved initial guess based on solving a 3-D elastic problem with the pressure from the previous step is shown to decrease the number of Newton iterations and increase robustness. Second, an improved methodology to find the time step that leads to fracture propagation is proposed and shown to decrease significantly the number of iterations. Third, reduced computational cost is observed by properly recycling the linear part of the coupled stiffness matrix. Two representative examples are used to analyze these improvements. Additionally, a methodology to include the leak-off term is presented and verified against asymptotic analytical solutions. Conservation of mass is shown to be well satisfied in all examples.  相似文献   

小区域消费级无人机倾斜摄影像控点布设及建模精度研究   总被引：1，自引：0，他引：1  

桑文刚  李娜  韩峰  赵培华  李玉斌 《测绘通报》2019,(10):93-96

像控点布设是无人机倾斜摄影施测阶段的重要环节，直接决定后期三维实景模型的精度。本文面向校园等小区域环境，利用消费级单镜头多旋翼无人机航摄系统获取影像数据，重点设计了不同像控点布设方案，基于全自动数据处理系统进行空三加密及三维模型的构建，并对模型成果进行精度分析，为实际工作中小区域像控点的布设提供建议和指导。  相似文献   

Thermo-hydro-mechanical modeling of unsaturated soils using isogeometric analysis: Model development and application to strain localization simulation     

Shahriar Shahrokhabadi  Toan Duc Cao  Farshid Vahedifard 《国际地质力学数值与分析法杂志》2020,44(2):261-292

This study presents a thermo-hydro-mechanical (THM) model of unsaturated soils using isogeometric analysis (IGA). The framework employs Bézier extraction to connect IGA to the conventional finite element analysis (FEA), featuring the current study as one of the first attempts to develop an IGA-FEA framework for solving THM problems in unsaturated soils. IGA offers higher levels of interelement continuity making it an attractive method for solving highly nonlinear problems. The governing equations of linear momentum, mass, and energy balance are coupled based on the averaging procedure within the hybrid mixture theory. The Drucker-Prager yield surface is used to limit the modified effective stress where the model follows small strain, quasi-static loading conditions. Temperature dependency of the surface tension is implemented in the soil-water retention curve. Nonuniform rational B-splines (NURBS) basis functions are used in the standard Galerkin method and weak formulations of the balance equations. Displacement, capillary pressure, gas pressure, and temperature are four independent quantities that are approximated by NURBS in spatial discretization. The framework is used to simulate strain localization in an undrained dense sand subjected to plane strain biaxial compression under different temperatures and displacement velocities. Results show that an increase in the displacement rate leads to reduction in the equivalent plastic strain while an increase in the temperature leads to an increase in the equivalent plastic strain. The findings suggest that the proposed IGA-based framework offers a viable alternative for solving THM problems in unsaturated soils.  相似文献   

多功能水合物沉积物三轴试验系统的研制与应用     

周家作  韦昌富  魏厚振  杨周洁  李力昕  李彦龙  丁根荣 《岩土力学》2020,41(1):342-352

研制了新型多功能水合物沉积物三轴试验系统，系统由供-排气模块、应力加载模块、温控模块、数据采集模块和辅助模块组成。利用泵驱动高压液体施加围压和轴压，加载方式有恒压、恒流、梯度增压、跟踪气压模式，可以实现不同条件下的水合物合成、三轴剪切。围压跟踪气压的功能使水合物生成过程中净围压不变，保证了试样初始条件一致性。根据围压液体积变化测量试样体积变形，通过设置回压泵压力变化方式控制水合物气压，可以模拟不同降压速率条件下的水合物沉积物分解变形。以泥质粉细砂和二氧化碳为材料制作了三轴试样，进行了水合物合成、三轴剪切和降压分解试验，检验了仪器的可靠性。  相似文献